Home \ Garage Doors \ Sectional doors \ Alama
Vertical sliding mechanism with tension springs
Residential sectional door
Functional and convenient
With balancing springs for low height
Easy installation and maintenance
Feasibility study upon request
TECHNICAL INFORMATION
The sectional door model Alama is characterised by a vertical sliding mechanism on special side guides, which is positioned under the ceiling of the garage and parallel to the floor using tension springs. ALAMA sectional doors are manufactured with the same typology of double-wall panels that is used in the other series produced, but with balancing springs inserted in the vertical uprights that, with the same side dimensions, reduce the extension in height. According to the same operation, this new mechanical type guarantees greater speed and simplicity of installation and maintenance. We recommend that you always check the suitability of the product's application with the help of the personnel at our sales offices. The anti-ageing EPDM perimeter gaskets, which are resistant to atmospheric agents and UV rays, effectively protect against the weather and guarantee the tightness of the closure even in strong winds. The risk of accidents during manual opening and closing has been eliminated thanks to the use of anti-pinch joints, while any automatic motorisation includes all the safety systems required by law.
The IRIDIUM DOORS residential sectional doors are made of sandwich panels in pre-painted steel sheet, embossed finish and 38 - 40 kg/m3 insulation (CFC-free insulation), with an overall thickness of 40 mm. Counterbalance with springs and conformation of the mounting panel (visible internal hinges). Completed with spring break safety guard (cable guard available as an option). Lifting handle, pull cord and internal deadbolt. Ready for lateral motorisation (upon request).
Sectional garage doors made with panels consisting of an aluminium frame and infilled with transparent polycarbonate insulating glazing or with grilles or horizontal slats.
All these solutions guarantee the passage of light and the ventilation of rooms when required by regulations, without penalising the aesthetics of the product
The positioning of the portholes is subject to the width of the door and, consequently, to the size of the panels that make up the mantle.
Infinite possibilities for customisation. Panels are available in an embossed stucco, woodgrain, smooth or micro-diamond finish; choose the design that best suits the style of your home and your taste.
Regarding the colour range, the standard colour palette is flanked by a wide range of Ral colours that IRIDIUM DOORS supplies in a very short time, managing the painting process independently and making your sectional garage door unique.
REAL WOOD PANEL
All finishes include standard painting of the panels with paints suitable for outdoor use. Different finishes, special paints or any lacquering will be quoted in the estimate. If uprights and/or upper cornices are also required, their size must also be taken into account when calculating the square meters of cladding.
ALCOR – ALUMINIUM PANELS
Panel made of aluminium profiles with anodised or RAL painted finish (upon request) and finned / glazed / grilled sections. The standard height of the panel is 500 mm, modifiable according to the conformation and overall height of the door. The sections that make up the single panel normally measure between 750 mm and 1000 mm in number proportional to the width of the sectional door. Upon request and subject to feasibility analysis, different conformations to those described above may be evaluated.
We always recommend to verify the product's suitability for application with the help of our sales staff.
A wide range of accessories completes the system ensuring a high level of comfort.
Shafts
Cables
Hinges
Spring break strips
Hardware
Guide tracks
Springs
Portholes
Panels
Pedestrian doors
