Notice: wpdb::prepare was called incorrectly. The query does not contain the correct number of placeholders (2) for the number of arguments passed (3). Please see Debugging in WordPress for more information. (This message was added in version 4.8.3.) in /home/iridium/public_html/wp-includes/functions.php on line 4139
Scorpio: VERTICAL DOORS WITH TORSION SPRINGS

Categories

  • No categories

Contact Info

scorpio 2017-09-29T16:15:43+00:00

SCORPIO

VERTICAL DOORS WITH TORSION SPRINGS

Iridium Doors sectional doors are designed with galvanized and pre-coated double walls, injected with high-density polyurethane foam. Our doors guarantee high thermal insulation levels, protection from potential violations and particularly light and noiseless operations, thanks to a continuous guide track system that runs from the ground to the stop position.

The anti-aging EPDM perimeter gasket seals, highly resistant against bad weather and UV radiations, offer excellent protection from adverse weather conditions and guarantee the tightness of the door even in the presence of strong winds.

The risk of injuries during manual opening and closing of the doors is eliminated by the use of anti-crushing joints, while our motorisation solutions feature all safety systems required by law. Our vast range of accessories completes the system, offering high comfort levels.

Ral colours

colori ral pannelli garage
portone verticale con molle a torsione scorpio
pannelli verticale molle torsione trazione scorpio alama

Panels

Iridium Doors sectional industrial doors are designed with sandwich panels in embossed pre-coated and 38 – 40 kg/m3 insulated steel sheet (CFC-free insulation material).

Counterbalancing system with springs and panel conformation developed to allow the fitting of exposed internal hinges. The panels feature fall arrester devices that activate in the case of broken cables and springs.

Lifting handle, retraction rope and internal bolt. Our panels are fully suited for motorisation and feature an anti-cable derailment safety kit (for normal or low-threshold sliding doors).

REAL WOOD DOORS

All finishing solutions include standard coating of the panels with varnishes suitable for external use. Different coating solutions than the one described above or eventual lacquering solutions will be quoted in the estimate cost. In the event that uprights and/or the upper profile are also required, the measurements of these elements must also be included in the calculation of the coated square metres;

Our panels are available in various types of wood – the images should be regarded as only indicative.

pannelli legno

ALCOR-ALUMINIUM PANEL

Developed with aluminium profiles with either anodized or RAL-coated (on request) finishing and finned / glazed / grille sections. The standard height of the panel – 500mm. – can be modified in function of the conformation and total height of the door. The sections which compose each single panel normally measure between 750mm. and 1000mm., in proportional number to the width of the sectional door. On request, and following a feasability analysis, we are available to evaluate different conformations than those described above.

Lifting handle, retraction rope and internal bolt. Our panels are fully suited for motorisation and feature an anti-cable derailment safety kit (for normal or low-threshold sliding doors).

pannelli alcor alluminio
Ask for a quote